Preventing the appearance of damp spots and rising damp after installation
Description
Water-based product designed to prevent the rise of minerals from marble floors and coverings, agglomerates and stones in general.
It solves the problem of the escape of stains, streaks and efflorescence caused by the presence of impurities in the water.
It is compatible with any material used for installation and does not affect adhesion in any case.
It is a transparent and odorless product.
Features
- Product designed to prevent water and salts from rising on floors and walls in marble, granite, quartzite, agglomerate and stone in general during installation;
- The product is applied inside the tile or slab, which is laid on all sides in direct contact with the laying adhesives;
- It is compatible with any adhesive used for installation and therefore does not affect adhesion in any way;
- It is a transparent and odorless product that can be applied on quartzite, marble, granite, gneiss and agglomerates;
- It is particularly suitable for use on white marble and outdoor floors which are more prone to these problems.
- It is applied by roller, brush or spray, spreading a single coat of product evenly on the part of the support that will come into contact with the laying mixture.
- Leave to dry for at least six hours. The product must be used pure for use on very absorbent materials, while it can be diluted from 10 to 50% in water for
- Use on supports with limited absorbency.
- If used by immersion, dilute the product 50% in water.